(+34) 976 500 120 | Contact us


The RZ1FZ1 (AS) cables are recommended to carry out permanent installations wherever a low emission of corrosive fumes and gasesis required due to fire hazards such as public premises, hospitals, schools, shopping centres and airports. The metal strip provides greater protection against mechanical stresses and the action of rodents. Its flexibility makes it very suitable in complex and difficult installations.

Reference Standards

UNE 21123, HD 603 S1 and IEC 60502


Suitable for the following installations:
  • Sub-surface power source networks for outside lighting installations
  • General supply line
  • Individual bypass
  • Indoor or receptor installations
  • Public premises
  • Sub-surface networks for low voltage distribution
  • Electric energy distribution networks
  • Sub-surface supply lines
  • Installations in premises with special characteristics
  • Suitable for installations where there is a need to increase protection against fire hazards

Industrial Outdoor lighting Maximum temperature 90 ºC High Safety Flexible Armoured cable Anti rodent RoHS

Technical Characteristics

RZ1FZ1 (AS) 0,6/1 kV RZ1FZ1 (AS) 0,6/1 kV
1. Conductor

Electrolytic copper conductor, Class I and II, according to BS EN 60228:2005 (previously BS6360) and UNE 60228

2. Insulation

Cross-linked polyethylene (XLPE), type DIX-3, according to UNE 21123 and HD 603S1

3. Armour bedding

Thermoplastic polyolefin

4. Metallic armour

Steel strip

5. Sheath

Thermoplastic polyolefin in compliance with UNE 21123

Nominal voltage

0,6/1 kV

Test voltage

3.500 V A.C.

Maximum temperature

90 ºC

Other characteristics

Colours according to UNE 21089 and HD 303S2 (colour marking when less than five conductors) and UNE-EN 50334 and EN 50334 (inscription marking when more than five conductors)
Non-flame propagation in compliance with UNE-EN 60332, EN 60332 and IEC 60332
No-fire propagation in compliance with UNE-EN 50266, EN 50266 and IEC 60332
Low halogen content in compliance with IEC 60754-1 and 60754-2
Low emission of corrosive gases in compliance with IEC 60754-1 and 60754-2
Low emission of opaque fumes in compliance with UNE-EN 61034, EN 61034 and IEC 61034
The use of cross-linked polyethylene (XLPE) allows a greater density of current with the same given cross-section, when compared to insulation with PVC


at 20 °C







I declare to be informed that I can exercise rights of access, rectification, cancellation and opposition by addressing RCT via email lopd@rct.es

By checking the box I acknowledge that I have read and I agree with the previous clause *

Newsletter 2

Los datos recogidos en el siguiente formulario los utilizaremos para enviar comunicaciones sobre nuestros productos o servicios. Usamos Elastic Email como nuestro servicio de Marketing Automation. Al enviar el formulario usted accede a que los datos entregados se transfieran a Elastic Email para ser procesados según sus términos de uso y política de privacidad.