(+34) 976 500 120 | Contact us

Discover our range of shielded cables

 

 

We offer you a cable for every need

For supplying power to sensitive equipment, one of the most commonly-used options is to use shielded cables. The shielded cables we design and manufacture at Cables RCT offer maximum guarantees that the installations will be protected from the effects of electromagnetic interferences.

 

shielded all w

 

Below, you can consult the detailed characteristics of each one of our shielded cables.

Halogen-free cables ROZ1-K (AS) 300/500 V, ROZ1-K mica (AS+) 300/500 V and ROZ1FZ1-K mica (AS+) 300/500V are those indicated for use in electrical circuits for fire alarms, alarms, switches, detectors… They are suitable for interior and exterior installations, on exposed supports, in tubes or under ground. The ROZ1FZ1-K mica (AS+) 300/500V also provides great protection against rodents and mechanical damage.

 

 

The following products are those indicated for undertaking fixed installations requiring electromagnetic protection to prevent parasitic currents.

 

 

The products from the following group are also those indicated for undertaking fixed installations requiring electromagnetic protection to prevent parasitic currents but in installations where, in the event of fire, low emissions of fumes and corrosive gases are required. Its use is recommended in control and command applications for variators, electrovalves, starters for machines and automatons, stepping switches, regulation of temperature, intensity or tension in motorised valves, as well as for installations in I.T. centres, airports, road tunnels, railways etc.

 

 

ROZ1-K (AS) VFD (Variable Frequency Drive) EMC (Electromagnetic Compatibility) 0.6/1 kV cables are those indicated for supplying power to installations requiring a high level of electromagnetic protection. The tear thread makes it easy to strip off the cover. 

 

RVKV-K 0,6/1 kV (CPR Eca) cables comply with product classification criteria according to CPR Regulation CPR 305/2011 and rule EN 50575 and are indicated for use in installations presenting large variations in frequency. They are for use in control and command applications for variators, electrovalves, starters for machines and automatons, stepping switches, regulation of temperature, intensity or tension in motorised valves.

 

 

We are at your disposal to answer any queries you may have about the use and specifications of our cables by calling us on +34 976 500 120, or by sending us an email using the contact form provided.

Do not forget to visit our blog regularly to keep up to date with our news and to subscribe to our newsletter so as not to miss out on any innovations. 

 

Newsletter

The data gathered through the next form will be used to send communications on our products and services. We use Elastic Email as our marketing automation service. By sending this form you agree with the transfer of the data to Elastic Email to be processed according to their terms of use and privacy policy.

Responsible: Cables RCT S.A.U. Purpose: To manage the submission of information and commercial prospecting. Legitimation: consent of the interested party. Recipients: Data will be transferred to Elastic Email for the automation of the submission. Rights: Access, correction and data erasure, as well as other rights, as explained in the additional information.Additional information on data protection is available on our website’s privacy policy